Advice On Mods

[MBg35]

Havent been on here in a while so im tryin to catch up on stuff i can do to my car. its my first G and i dont kno much bout it so im taking in any suggestions or advice anyone gives. its an 04 auto with 116k its completely stock and lookin to do some mods, what would u guys recommend, its got new plugs n brakes n is there any maintenance i should be looking into due to the mileage?

[chicklet]

Welcome back! Check the rest of the fluids...transmission, diff, brake fluid power steering fluid, coolant, etc.

As far as mods, an intake will wake it up and give you some more engine noise. Sway bars help Gs alot.

[Brando]

Welcome.

How about a new set of wheels/tires to personalize it to your style?

[Brett@ImportPartsPro]

Yeah prolly time for a coolant flush and transmission / diff service. For mods a good intake is good bang for the buck. And the intake tube from the 350z swaps over to eliminate that huge baffle that the G comes with.

http://www.importpartspro.com/pg3531xcn8.html

[falconey]

Lower that puppy on throw on some aftermarket wheels. That's the route I would go.

[SR71]

Drop, sways, wheels/tires, intake, exhaust. That would be the order Id do them in.

[w0ady]

my fav 3 mods for the g35:

sways - huge improvement in handling
06-07 headlights - huge improvement in light output plus they look great
plenum spacer - best bang for the buck power improvement

but it really depends what you're looking for - style? performance? handling? entertainment?

[Lando]

#1 suggestion I haven't heard yet...

keep your windows down! you'll always be turning heads!

and, what the guys said....

If you haven't changed your belts yet, you need to get that done.

As for mods, I would start with the rims/wheels, then dropping your suspension to get that agressive look. You'll kill everyone when you drive up.

You already had me at "Advice on Mods"

My intuition is that your going to get ALOT of help around here. Everyone is great.

Good luck!

BTW, I'm Lando

[MBg35]

Thanks to everyone on the help...ima lil tight on cash so as much as id love to go with a set of wheels thatd have to be last rite now but ill get there soon lol im all about more hp n heard the plenum and z tube are the ways to go besides turbo...after i do some maintenance id like to go with that but is there a certain brand or size plenum that is more beneficial than the others?

[Lando]

either aam or motordyne 5/16 would do you fine on the spacer. no need for the 1/2".

should be around $225-$250. Or you can find some used ones for cheaper...

gl

[carbonz]

Z1 motorsports has their house brand plenum. I use one, it being one of the more noticeable modes. A decent mod for around 100 bucks is stainless steel brake lines. They will get you a firmer brake pedal.

[w0ady]

+1 for motordynes 5/16 - most popular spacer. z-tube and a k&n drop in filter are a nice cheap mod as well. you can spend a little more for the jwt popcharger.

[chaser9478]

I have a 5/16 spacer and the jet performance rig. If anybody wants it email me at chaser9478@yahoo.com

[Motowipeout]

Hey, I grew up in Durant!!! Do they still have "The Worlds Largest Peanut" in front of City Hall?????