Just got the E-Mail with the UPS Tracking Numbers. My new Sparco Seats will arrive on Friday.
Won't have the mounting hardware this week though, which is too bad--it would have been nice to have them installed for a local show this Sunday (assuming the weather holds up).
Been poking around on other forums to get a heads-up on any potential installation problems. I don't have the side airbags, so that's one hurdle I have to worry about jumping.
Reckon I'll post pics when I install them....
They look great!
GOVERNMENT... LESS IS MORE
I was torn between getting these (R505) and the Torino 2. Finally decided on the R505 because they're a bit more unique looking for Sparcos.
Got an E-Mail from Sparco--the mounting hardware is scheduled for delivery tomorrow as well--I might be able to get the seats installed in time for the show after all! :RaceFlag:
Congrats! Cool seats!
2010 370Z NISMO #519 Pearl White
2012 VW Golf R
When I changed my seats out it was a piece of cake. Just installed and plugged in the plug for the airbags. Of course my replacements were out of a 350Z :)
Don't forsee any problems for you.
JUST ZAY-NO!
The Doctor is in.......a Brickyard Track 350Z. 528 RWHP on Sharif's Heartbreaker
NISMO Wing and Side Skirts, Kaminari Front Lip Spoiler and Scooped Hood, Bat's Smoked Vinyl Overlays, Chrome Bolt Covers Under the Hood, eDashkit Visor Covers, CF Emblem Covers, Bat's CF Inside Door Barrel Inlays and Gauge Pod Inlays, Front "Z" Emblem, Brickyard Painted Engine Cover/Strut Brace, and Engine Bay Finisher Painted by ZPRESENCE (RIP Rob), "Z" Oil Cap, ZeeToyz Polished Silver Fluid Container Covers, Rear Strut Z-Partition, Unlimited Tuning Light-Up Door Sills, Vertical Doors Lambo Door Kit
Pioneer XM Radio, Valentine One Radar/Laser Detection, ZR3 Front and Rear Laser Diffusers, The In-Z P.C. with Xenarc Screen, Windows XP Professional, GPS Navigation, DVD/MP3 Player, & TV Tuner, and Digimoto OBD II
Tein S-Tech Springs and Hotchkis Sways, Z-Xtreme Grounding Kit, Forged Perf.S1 Shortblock Low Compression Build, Arias Extreme Duty Pistons, Manley Rods, Rev-Up Oil Pump, Deatschwerks 600 cc Injectors, GReddyTi-C Exhaust, OS GikenTwin Plate Clutch, Cosworth Intake (Powdercoated by our own Mike Golding), Koyo V-Core Radiator, Greddy Blow Off Valve, HKS EVC-S Boost Controller, AAM Spec Fuel Solution for FI, Walbro High Flow Fuel Pump, , AEM A/F Sensor and Gauge, Greddy EGT and Boost Gauges inside A-Pillar Triple Gauge Pod, 19" Racing Hart CPF Tunes with BFG G-Force TA 245/35/19 & 275/35/19
Watch Her in Action... http://vimeo.com/33254389
I ordered the Sparco rails and sliders, specifically the passenger side rail for Zs equipped with automatic transmissions. I've Googled all kinds of horror stories about the Sparco rails having to be drilled, Dremeled, not lining up right, hitting the door panel, etc. But these were older threads from different forums. Some used different brand rails to get the seats to sit lower. Others were competition-only seats that should have been used with the side-rails rather than the flat kind.
I don't have the side and curtain airbags, so I shouldn't have to worry about jury-rigging the existing wires with Radio Shack resistors. Hopefully my install will go as smoothly as yours, Dr. Bonz. I'm keeping my finger crossed...
Well, UPS just dropped off the seats.
No sign of the rails. They may come around 7:00 - 7:30 PM. I was hoping to get them so I could get them in for the show on Sunday, but if not, I'm not gonna stress over it. But man, these things feel good! Can't wait to get them in the Z!
I'll post better pics as soon as I get them in.
Have a good Memorial Day Weekend, everyone!:sun_smile
Sweet, can't wait till you get'em in the car!:biggthump
GOVERNMENT... LESS IS MORE
Nice addition! Post some pics up when they are installed:biggthump
Mods: NISMO Exhaust - NISMO Shift Knob - 15% tint - S2K Antenna - PIAA interior, license plate, and back up led light bulbs - Tail Light Tint - JWT Pop Charger
Very nice seats.
Ran into my first snag:
The bracket they sent for the passenger side was for a Z with a manual transmission instead of an auto, so I sent it back. Turns out Sparco has discontinued the seat bracket for the auto trans, even though it's still on their website.
There does seem to be a 500 series bracket for the 350Z with an auto trans, so I'm arranging to have a set of 500 series brackets shipped in place of the 400 series I ordered.
It would be nice if a company of Sparco's size and reputation would keep their site updated...
I love your sparco. I can have them?
Special thanks to my sponsors: ATK Designs | BC Racing | Dunlop | Rotora | TSM | Vellano.
Only if I can't get the mounting bracket issue resolved--then they're yours--for a price, of course... ;)Originally Posted by ATL_Red_G35
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
|
|
 |
Reply With Quote
copy1.JPG)
