Fuel Systems, Injectors, Cams, Pistons, Rods, Bearings, Block
My motor finally gave out the other day. So I ordered a rebuilt long-block from Barnettes Motors in Virginia. I was wondering if anyone has purchased, or knows anyone who has purchased a motor from them. Just to get some opinions on quality, reliability, ect. Also was going to ask anyone if it...
Ok, I bought an 04' Spec V last week and VQ35de motor from an 08' Altima a few weeks back with the intention of doing a motor swap sometime this fall.
My 05 auto/coupe 43k on the clicker drives/feels perfect. However, I recently had oil changed and I had a list print out of what needs to be done on my car (serpentine belt change 189$ & power steering flush and refil (89$)... If this was the case would I be able to feel or hear something...
ok just as i said gas mileage contest. this has nothing to do with price so yeah.. first you have to start off with a full tank of gas. soo fill it up, usually will mean you have to use a credit card. then fill it up erase your trip A when you fill up. when your gas light comes on fill it up...
2003 G35 Coupe - AT - 80K miles - Overheating Thermostat - replaced and tested Radiator - removed, taken to radiator shop checked and cleaned Radiator cap - replaced Electric fans - working fine Heat - works Oil Change - no water in oil (not head gasket) Air in system - filled system...
As most of you know 2005, 2006 Rev-ups were plagued with Oil Consumption issues. My car was not of the lucky ones to be free of this problem. To get my G35 back on the road I'm looking to rebuild the short block me self with the help of my friend who is a been Infiniti/Nissan tech. As a big...
Changed the oil the other day and added a can of seafoam to the tank. Today i fed half a bottle of seafoam in to the brake booster line... Smoked real well. The car has about 76K on it and figured it wouldnt hurt to do that... I know on my other automotive forums seafoam is a favored product. I...
I've search and search Here's the entire story in a nut shell. I have a 05' G35 Coupe. I replaced the motor with a VERY Low mileage block (3k mi) back in May of Last year(10'). Ever since the install the motor has been sluggish. A lot less power than the original. I new something was...
My car just hit 90k and just recently I have noticed a ticking noise that increases with RPM. Sometimes its louder than others, sometimes no noise at all. Started just after spark plugs and oil were changed. About a week to be exact. It sounds to be coming more from the passenger side. And...
From the research I've done it seems the only real difference between the mrev2 and a stock non-rev plenum is some porting and minor polishing. Is the mrev really worth $400 when the stock is only $200?
After I put the non-foulers on my car, the cel came back on but the code changed. Now its throwing a code saying that its running lean. The idle issues I was having have gone away, and it seems the car is running better than before I tried using the non-fouler fix. Any information on the reason it...
Hello everybody, new to this forum, I have a 2003 infiniti g35 sedan, that needs a motor anybody no where to look for one. used or rebuilt and install??? I live in the san jose area. Thanks Barry
i just recently put in an aftermarket gauge. but now my "service engine soon" is on. could anyone let me know how i could reset this? thank you
Here are some facts that I have collected: Data collected from: 2003.5 G35 Sedan A/T OEM Thermostat PWR Radiator Hayden Fan Clutch Ambient Temp 89-95F (mid morning - afternoon)
Is there a programmer or something I can buy to adjust my timing myself?
So after having the fan clutch go out on me a few times, and now really noticing the gas consumption due to 99degree weather in Miami, FL. I have decided to go back to the E-Fan setup. This time I WILL NOT be installing the fans directly on the radiator core. PWR radiators are not cheap and...
Hi everyone, when I got my car 3 years ago, the previous owner didn't take care of the transmission, so the dealer got the manual transmission replaced at an independent garage. When I picked up the car, the friction point on the clutch was way lower than when I first tried it; also, the clutch...
What sparkplugs are best suited for a 03 G35 coupe? any ideas
I have a 04 Coupe VQ35DE 5AT I have the AEM CAI and a Motordyne 5/16 plenum spacer. What other bolt on mods should I get? IDK what else to do beside a SC or turbo and exhaust. (of coarse the SC/turbo will need supporting mods) But as for now what will be a good performance part to add?
I am either looking at a Turbonetics T60-1 or a Vortech supercharger. I am leaning alot toward the Vortech mainly because I feel as if the G has a lot of top end stock but lack(not really but comparably) in bottom end. If I race doing 40+ rolls I take mustang GTs and Hondas (even from a dig) ,...
He everyone, so here is my dilemma, car won't start. It turns over fine, but it’s like no fuel or possible a pressure or vacuum problem... On Saturday, I fill the car with premium fuel from my local grocery store (go there 75% of the time). The tank was completely empty prior to this fill up. ...
Looking to replace my rotors but i dont know what to get or where to get them or what a reasonable price is and i'm also looking to get new fuel injectors. Any ideas would be greatly appreciated.
Hey guys-- saw some "changing spark plugs" threads awhile back that addressed this, but can't find them now for the life of me. Just changed out the original plugs from the G at 74k (yeah, I drive a lot evidently...) and the middle passenger's side plug had a little puddle of oil in the port. ...
Started disassembling the car on Saturday around 11am. Always wear protection
need some help. my engine rattles/ticks at about 2100rpm. it comes on when i let off the gas or if im crusin at a slow speed. it disappears a couple seconds after i let of the gas but if im going at a slow spped, it doesnt go away. ive searched through the threads and coudnt find one with a similar...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules