Automatic Transmission, Manual Transmission, and Rear End
I have done many many things to cars, but I have never touched a transmission. I was at infiniti today and they wanted $2400 to replace it, I almost **** my pants right there. I figure as long as I plan on doing it myself, I should get an after market clutch. Any suggestions? I had a Spec stage...
Hey everyone! I apologize in advance for the novel I'm about to write! :bonkers: My G has around 78k on her and I believe it's about time to replace the original clutch. For the past year and a half or so I've noticed the pedal will stick on a really hot day or when I'm driving aggressively...
Last night, my clutch was stuck to the floor and I couldn't get it in gear. When I got into gear, the pedal was still stuck and I had to kick it back out to change the gear. Went to search for reasons for this issue, I found something about changing the clutch fluid. Here's the site Clutch pedal...
Well, I was testing the 07 Z's Potential out yesterday with a friend 300zx TT Tuned @11psi. We did 3 runs. Each run started rolling at 10mph on first gear. However, for every run, my wheels spun out (only for a short moment) when I shifted to 2nd Gear. We couldn't figure out why as we...
installed single mass flywheel now wont start - only turns over there is only one wat to install the flywheel due to the locating dowel it is an exedy single mass flywheel kit in a 350gt coupe 6 speed the only thing im guessing it could be is the crank angle sensor located in the gearbox...
epic site here! ill be on here heaps but its 1 am here lol i need to find out what the g35 flywheel torque specs are? i think they are 88nm but just want to check will intro after work cheers!
so I was bored and adjusted my clutch pedal travel today. now it engages right off the floor. feels much better now. Since I was used to the long travel it had before, I feel like I'm going to put my foot through the floor now. I guess it'll take a little getting used to. I wish I had done...
O.K. I'm hoping someone can help me out on this little problem. I Installed some gauges this weekend ( Boost, A/F, Fuel ). After everything has all hooked up I turned the car on to test them out. Everything worked great. I had to move the car out from the center of the garage because the wife...
I am not sure if anybody knows but in my g i have a problem with my clutch i think. whenever i get on the gas the RPM's rev really high and then the RPM's drop back down and then it will get into gear. If anyone knows what the problem might be please help me out it would be greatly appreciated.
It has been around a while and after a 1200 mile drive I was able to figure it out some more... Basicly there is a vibration that is harmonic and not fast, it is much less while decelerating and you feel it in the front of the car and you feel it most in the shifter... Basicly I think a bearing...
Not sure where to post this, but there's a warning light in my G35 Coupe and I have no idea what it means. Its located on the left side, above the HOT -- COLD dial i believe.. well, it sorta looks like this = ( ! ) with some squiggly lines underneath the "!" . Can someone tell me what...
Hey all, tranny is starting to slip so im looking for an opinion on the nismo clutch. Gonna get the following: Nismo Disc and Cover Nismo Pressure Plate Nismo R Tune Flywheel Nismo Braided Clutch Hose Will a stock throwout bearing and pilot bearing work with the above? are there any...
If you have purchased a Z1street clutch and it has worn out prematurly please let us know! I had mine give out after 15000 mi I got 65000 mi on my stock clutch. Please chime in~
Just got my car back from Z1 after they installed their new clutch and ultra light weight flywheel package. The car drives great, the pedal feel is the same, if not lighter then the stock clutch. The stock flywheel is around 33 lbs, the ultra light weight is around 13 lbs. The car showed a gain...
Just wondering if anyone has upgraded there automatic. I know that stillen does a valve body upgrade and i have noticed forged has a upgrade on their site as well. Also I see that SGP has full tranny builds for the auto to handle 500+ hp. There is nothing wrong with mine currently but in the...
I have the 03 coupe with the 5at and I have a friend who had a 05Z 6MT with LSD. Can I interchange those out and have the higher gears in my rear end and the lsd? Thanks
When I get into my 04 6mt I am having a hell of a time getting the car into reverse when it is cold. I really have to pull roughly 25+lbs to get the shifter into reverse. Any ideas??? I had teh tranny replaced 10000 miles ago.
Today on the highway cruising in 6th at 70 mph I hit the gas to accelerate past someone. My tach went up but the car didn't move ... did it a few more times in multiple gears. So long story short I think my clutch is slipping. I'm gonna put in an aftermarket clutch & flywheel. Anyone have...
my clutch pedal was ajusted but its like sucked to the floor how do i make it come out more towards the driver?
I have an 03 g coupe automatic. I have an 1800 watt amp and 2 12's in the trunk. When I have the stereo turned up, not BLASTING, just up some, and the bass hits, the cars shifts gears VERY hard.... it jerks like you wouldn't believe. SO, in fear of breaking my car, I have disconnected my subs. Why...
Tell me the your experiences with this setup. I have heard they have a setup for the new HR. I need more grab with all the power I am making. J
Anyone know of a simple LSD for a Auto Coupe? I don't want to go as far as the 1.5/2way as it's a street car. Just fed up of it spinning it's inside wheel pulling out at junctions. I seen the CUSCO Hybrid Diff. Is this a viscous/helical diff? (cannot read japanese!) All I want is something like...
Where can I purchase lower gears? Any information on how to increase the take-off or launch ability of the G. In the other performance cars I have owned I always changed the rear-end gears, and the "seat-of-the-pants" feeling was greatly changed. I really want to increase my take-off, any help...
I'm happy to say that I got my 4.083 final drive gears and Carbonetics CF LSD installed at Lokey Infiniti this week. Big thanks to John Oliva, Doug Urban, and of course Christian for actually doing the work! It's a mod that Lokey doesn't do on a regular basis, but they have the equipment and...
Regretfully, I purchased an automatic 03 coupe. I found some 6 speed trannys. Does anyone have a parts list I'll need to make this happen? AND... know any good installers in Tampa, FL :icecream: THANKS!!!!!
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules